US regulator urges safety checks on some Boeing 737 rudders

US regulator urges safety checks on some Boeing 737 rudders

Boeing has come under increasing pressure following a number of safety incidents involving its aircraft
Boeing has come under increasing pressure following a number of safety incidents involving its aircraft. Photo: JUSTIN TALLIS / AFP/File
Source: AFP

PAY ATTENTION: NOW You can COMMENT on our articles on the YEN website! Learn how to get started.

The US National Transportation Safety Board (NTSB) on Thursday issued "urgent safety recommendations" regarding the rudder systems on certain Boeing 737 aircraft, highlighting a risk of jamming.

It came after a February 6 incident involving a Boeing 737 MAX 8 operated by United Airlines, whose rudder pedals were "stuck" in the neutral position while on the tarmac after landing at Newark airport in New Jersey.

None of the 155 passengers and six crew members were hurt, the NTSB said, with the captain using the nose landing gear controls to steer the plane.

Boeing has come under increasing pressure following a number of safety incidents involving its aircraft. It did not immediately respond to an AFP request for comment.

The cause of the February incident was found to be the rollout guidance actuator, one of the rudder control components, with tests revealing it was susceptible to moisture which could "freeze and limit rudder system movement," the NTSB said.

Read also

New York area port prepares for possible US strike disruption

The faulty actuator was manufactured by US company Collins Aerospace, it added.

"Collins notified Boeing that more than 353 actuators that Collins had delivered to Boeing since February 2017 were affected by this condition," the NTSB said.

The part is installed in the tail of some Boeing 737 NG and 737 MAX airplanes.

The Federal Aviation Authority said it would convene a corrective action review board on Friday based on the NTSB's recommendations to determine next steps.

Boeing has been under close regulator scrutiny since an in-flight incident involving an Alaska Airlines 737 MAX 9 aircraft in early January.

That event saw a door plug blow out mid-flight, leaving a hole in the side of the aircraft.

Boeing's quality control and production processes had already been called into question after the crashes of two 737 MAX aircraft in 2018 and 2019, killing 346 people.

Read also

Boeing boosts pay offer in effort to end strike

In March, the US aviation giant reshuffled its leadership, with new boss Kelly Ortberg taking over on August 8.

Ortberg had headed Rockwell Collins, the company which later became Collins Aerospace, from 2013 to 2018.

New feature: Сheck out news that is picked for YOU ➡️ click on “Recommended for you” and enjoy!

Source: AFP

Authors:
AFP avatar

AFP AFP text, photo, graphic, audio or video material shall not be published, broadcast, rewritten for broadcast or publication or redistributed directly or indirectly in any medium. AFP news material may not be stored in whole or in part in a computer or otherwise except for personal and non-commercial use. AFP will not be held liable for any delays, inaccuracies, errors or omissions in any AFP news material or in transmission or delivery of all or any part thereof or for any damages whatsoever. As a newswire service, AFP does not obtain releases from subjects, individuals, groups or entities contained in its photographs, videos, graphics or quoted in its texts. Further, no clearance is obtained from the owners of any trademarks or copyrighted materials whose marks and materials are included in AFP material. Therefore you will be solely responsible for obtaining any and all necessary releases from whatever individuals and/or entities necessary for any uses of AFP material.