Multi TV installation guide, channels, and frequencies

Multi TV installation guide, channels, and frequencies

For the lovers of what Ghanaian television has to offer, Multi TV is a top pick. Offering more than 20 TV and radio channels in digital format, Multi TV meets all the entertainment, news and sports needs of its viewers. Multi TV hosts all the leading TV channel providers in Ghana, including the live streaming and broadcasting of events and news. Most people, however, are not aware of the installation procedures of this renowned TV. Below is the Multi TV installation guide.

Multi TV installation guide, channels, and frequencies

Multi TV is a countrywide free-to-air television based in Ghana. Operating more than 20 television and radio channels (and counting), Mutli TV offers a variety of entertainment, news and sports channels in digital format. Multi TV also provides the live streaming of news, events and videos from all the leading TV channel providers in Ghana. Here is the Multi TV installation guide.

Multi TV installation guide

The Multi TV satellite direction is positioned towards the east. Therefore, you must ensure your satellite dish is facing the east during Multi TV installation. This is because, the signal comes from that direction. The following is a step-by-step guide for Multi TV installation.

  1. First, install the dish using the dish manual. The dish comes with a round plate, a dish cap, a stand, an LNB and an LNB holder, dish accessories.
  2. Assemble the dish, then carefully fix the LNB in its holder at the last end of the angle bar. (You can get a dealer to help fix the dish for you then proceed with the installation).
  3. Mount the stand with the four holes at the rear end on a wall where you deem fit. (The stand has eight holes all together. When fixing the stand, be careful not to bend or turn the stand at the wrong position. Hence, first hold the stand firmly with your hands as if mounting the dish, then see if the dish is well fixed in a way that it can track signal while facing the east direction. If everything is okay, mount the stand on the wall).
  4. Use normal nails on a facial board and use concrete nails for a wall.
  5. Mount the dish in a place where there are no objects blocking the signal (e.g. tall buildings, planted trees, human object, thick electric cables etc).
  6. After mounting the dish, tighten it partially to allow for adjusting and turning. This is because you may have to turn the dish vertically and horizontally until the signal shoots or flashes.
  7. Connect the coaxial cable from your dish to the receiver using the connecters.
  8. Connect it into the receiver’s LNB input.
  9. Power the receiver on.

After completing the above procedures, the next step is the digital box installation. The following is the Multi TV installation guide for each different decoder.

READ ALSO: Live T.V stations in Ghana

multi tv channel codes, multi tv frequency 2018, multi tv channels list

Source: Dish Master

Syndicated box decoder

  1. Press MENU.
  2. On INSTALLATION press OK.
  3. Select MANUAL SEARCH and press OK.
  4. Press green button on the remote to edit the frequency.
  5. Select MODIFY.
  6. Press OK.
  7. Input 12522
  8. Press OK.
  9. Select POLARIZATION.
  10. Press the RIGHT button on the OK to change to vertical.
  11. Press OK.
  12. Then select SYMBOL RATE 27000
  13. Press on the BLUE BUTTON to save and exit OK to start scanning.
  14. Move channel down knob to start search.
  15. Press OK to start scanning.
  16. Press exit.

Strong box decoder

  1. Press MENU.
  2. Press on the RIGHT volume button.
  3. Input 0000 as password.
  4. Select MANUAL SCAN and press OK.
  5. Press RED BUTTON on the remote to select transponder ASTRA 3A/3B.
  6. Press GREEN BUTTON to add TP list.
  7. Input frequency 12522
  8. Go to symbol rate and input 27000
  9. Change the polarization to either V or H to make the bars change to green color.
  10. Press OK to scan.
  11. Exit.

Somotex ash box decoder

  1. Press MENU.
  2. Select INSTALLATION.
  3. Press the red button to EDIT.
  4. Input 12522 on the FREQUENCY.
  5. Press OK.
  6. Input 27000 on the SYMBOL RATE.
  7. Select POLARITY and press RIGHT button to select either Vertical or Horizontal.
  8. Select SAVE and press OK.
  9. Press on the BLUE button and OK to scan.
  10. Press OK on YES.
  11. Press EXIT to begin viewing channels.

Quality box decoder

  1. Press MENU.
  2. Scroll down to DVB-S, Click OK.
  3. Input 0000 and press OK.
  4. Select DISH SETTINGS.
  5. Click the YELLOW BUTTON on the remote to edit TP.
  6. Scroll down to SYMBOL RATE and key in 27000
  7. Scroll to YES and click OK.
  8. Scroll to SERVICE SEARCH, click OK.
  9. Scroll to START SCAN and click OK.

READ ALSO: Startimes channels and prices in Ghana

multi tv channel codes, multi tv frequency 2018, multi tv channels list

Source: Channels

Strong box (SRT 4330) decoder

  1. Tune to a MULTI TV channel.
  2. Press MENU on the remote.
  3. Press OK and input 0000.
  4. Go to TRANSPONDER and select 28E ASTRA 2A/2B/2F.
  5. Press the YELLOW button to edit.
  6. Input 12522 on FREQUENCY.
  7. Go to SYMBOL RATE and input 27000.
  8. Press the RED button to scan and then press OK.
  9. Press OK to save.
  10. Press EXIT to leave menu and start watching.

Multi TV HD LI/ HD plus

  1. On your remote, press MENU button
  2. Select installation using addition volume button and then press OK.
  3. Use the Channel Down to scroll and select "MANUAL SEARCH" and use OK to choose
  4. Further scroll down and select FREQUENCY
  5. Enter a frequency number
  6. Next, move down and select the SYMBOL RATE
  7. Enter a symbol rate number
  8. On POLARIZATION, change it to (V) by using Volume up
  9. Now, start Scanning for channels
  10. When the scan is complete, go ahead and exit to view saved channels.

CA plus series 2/SC 101 S2/Multi TV HD

  1. Start the installation by selecting this option from the MENU
  2. Use Channel Up and Down to choose SETTINGS
  3. Use 0000 as the password to open
  4. Select Frequency using the CHANNEL UP and DOWN
  5. Press the YELLOW button
  6. Choose FREQUENCY by using CHANNEL UP/DOWN buttons
  7. Then enter the FREQUENCY NUMBER
  8. Move to SYMBOL RATE and enter the SYMBOL RATE NUMBER
  9. Change the POLARITY state to V by using the volume buttons
  10. Scroll down and select YES and press OK
  11. Find SERVICE SEARCH by scrolling and press OK
  12. Scroll then choose SEARCH MODE
  13. Change from AUTO to MANUAL using volume buttons
  14. Start searching/scanning.
  15. Then press EXIT
  16. Press Volume down to select YES and press OK to save

Digital combo decoder Vi/combo decoder T2/S2

  1. Start by pressing the MENU button.
  2. Use Volume Up to select INSTALLATION before proceeding to press OK.
  3. Use Channel UP and DOWN to help you choose SATELLITE SETUP and press OK
  4. Select MANUAL SEARCH, which you can access by scrolling using Channel Down
  5. Scroll and select FREQUENCY
  6. Enter a FREQUENCY NUMBER
  7. Proceed to select SYMBOL RATE
  8. Then enter a SYMBOL RATE number
  9. Change POLARIZATION to (V)
  10. Start scanning for channels
  11. When the search is complete, press EXIT

QC-XPLUS Series II/QC-XPLUS Series IV/QC 001 CD CAS

  1. Press MENU on the remote control and press the POSITIVE VOLUME KEY (>+) to select INSTALLATION
  2. Scroll up and down to highlight DVB-S and press OK
  3. Enter default password (0000) to open.
  4. Scroll up and down to highlight DISH SETTING and press OK
  5. Select or highlight FREQUENCY by using CHANNEL UP and DOWN KEY (ch-/ch+)
  6. Press the YELLOW KEY (edit tp) on the remote a page will open
  7. Select or highlight FREQUENCY by using CHANNEL UP and DOWN KEY (ch-/ch+)
  8. Use the numbers on the remote control to enter the FREQUENCY NUMBER
  9. Scroll down to SYMBOL RATE and enter the SYMBOL RATE NUMBER
  10. Scroll down to POLARITY and change to V by using the POSITIVE VOLUME KEY (>+)
  11. Scroll down to select YES and press OK to save
  12. Scroll down to select SERVICE SEARCH and press OK a page will open
  13. Scroll up and down to highlight SEARCH MODE by using CHANNEL UP and DOWN KEY (ch-/ch+)
  14. Press POSITIVE VOLUME KEY >+ to change from AUTO to MANUAL
  15. Press CHANNEL UP and DOWN KEY to scroll to START SEARCH and press OK to scan.
  16. Press MENU or EXIT, a page will display
  17. Press NEGATIVE VOLUME KEY (-<) to select YES and press OK to save.

READ ALSO: List accredited media schools in Ghana

SC – 007 CA/ SC001 CA/SC007 CA Plus

  1. Press MENU on the remote control
  2. Scroll up and down by using CHANNEL UP and DOWN KEy (ch+/ch-) to highlight INSTALLATION and press OK
  3. Scroll up and down by using CHANNEL UP and DOWN KEY (ch-/ch+) to highlight MANUAL SEARCH and press OK
  4. Scroll down by using the DOWN CHANNEL KEY (ch-) to highlight TP frequency
  5. Press the GREEN BUTTON (TP edit) on the remote control
  6. Use UP and DOWN KEY (ch-/cg+) to scroll up and down to highlight ADD or MODIFY and press OK
  7. Scroll down to highlight TP frequency
  8. Use the numbers on the remote control to input FREQUENCY number and press OK
  9. Scroll down to highlight POLARIZATION and press POSITIVE VOLUME KEY (>+) to change to VERTICAL
  10. Scroll down to SYMBOL RATE and input the FREQUENCY NUMBER and press OK
  11. Press the BLUE BUTTON on the remote control to SAVE and EXIT
  12. Scroll down to START SEARCH and press OK to SCAN.
multi tv channel codes, multi tv frequency 2018, multi tv channels list

Source: TV Installs

Somotex (MTV-1722)

  1. Choose the MENU option
  2. Scroll to INSTALLATION and select it
  3. Scroll to the MANUAL SCAN option and select it
  4. Under the Manual scan option select FREQUENCY
  5. Set the FREQUENCY at 12525
  6. Use 30000 as the SYMBOL RATE
  7. Set the POLARITY to vertical
  8. Press the GREEN BUTTON on the remote control to start CHANNEL SEARCH
  9. Press EXIT or OK to view

Somotex (MTV-9800J)

  1. Choose the MENU option
  2. Select INSTALLATION after scrolling
  3. Go ahead and choose SATELLITE LIST
  4. The next thing is to select ASTRA 2A, 2B, 2D on the satellite list
  5. Save by pressing EXIT
  6. Choose the TP list
  7. Press the GREEN BUTTON to add a new frequency
  8. Use 12525 as the Frequency
  9. Set the SYMBOL RATE at 30000
  10. Change the POLARITY to vertical
  11. Start scanning for channels by double clicking on the OK button
  12. Press the OK button to save your new settings

SRT 4920/4922/4922A/4922D+

  1. Start by pressing the MENU option
  2. Select INSTALLATION and use 0000 as the password
  3. Go for MANUAL SCAN.
  4. Press the RED BUTTON to choose 28.2 ASTRA 1N/2A/2F.
  5. Use CHANNEL DOWN button to select the FREQUENCY.
  6. Press the GREEN Key and enter 12525 as the MULTI TV FREQUENCY .
  7. Use CHANNEL DOWN button to select the SYMBOL RATE and then enter 30000
  8. Set Polarization to vertical
  9. Start scanning for channels
  10. Press EXIT button when done

SRT 4950/SRT 4950H/4950E/4950M/

  1. Begin by pressing MENU
  2. Choose INSTALLATION.
  3. Select the MANUAL SCAN option before pressing OK.
  4. Hit the SAT BUTTON and select ASTRA 2(28.2E)
  5. Press the RED BUTTON and enter 12525
  6. Use CHANNEL DOWN button to select POLARIZATION.
  7. Next, choose the VER option VOLUME RIGHT button
  8. Use CHANNEL DOWN button to choose the SYMBOL RATE and enter 30000
  9. Press OK again to TICK the inputted Multi TV parameters
  10. After step 9, the SIGNAL QUALITY bar will change to GREEN
  11. Start scanning
  12. Information will pop up requesting for NETWORK SEARCH and press OK
  13. When “SEARCH ONLY FTA CHANNELS?" pops up, press OK
  14. Lastly, press the EXIT button thrice

Multi TV channels and frequencies

multi tv channel codes, multi tv frequency 2018, multi tv channels list

Source: Multi TV

New Multi TV frequency and symbol rate

Multi TV recently underwent an upgrade for the purposes of improving quality of its services to its customers. The following are the new Multi TV Frequency and Symbol Rates.

multi tv channel codes, multi tv frequency 2018, multi tv channels list

Source: Multi TV

How to get more channels on Multi TV

  1. Press MENU on your Multi TV remote control
  2. Select INSTALLATION
  3. Select EDIT SATELLITE
  4. Click on the YELLOW BUTTON to “Add” a new satellite. A new dialog box should appear titled “Add Satellite”.
  5. Fill the “Add Satellite” box using the information below and then select YES:
  • Satellite: Astra 2B
  • Longitude: 101 E
  • Frequency: 12572
  • Symbol Rate: 2854
  • Polarization: V (Press the Right button to change the polarization from H to V)

6. Astra 2B should now appear in the list of Satellites under the EDIT SATELLITE menu.

7. Select Astra 2B and press OK.

8. Under EDIT TRANSPONDER, Press the YELLOW BUTTON and enter the following values each at a time:

Frequency Symbol Rate Polarization

12572 2854 V

12599 3250 V

12729 2725 V

9. Press EXIT twice.

10. Press Menu > Installation > Install Satellite > Green Button (Scan)

11. You should now see additional TV channels and Radio stations.

READ ALSO: Top newspapers in Ghana and their editors

Subscribe to watch new videos

Source: Yen.com.gh

Related news
The top 9 types of cars in Ghana and their prices

Here are the most common types of cars in Ghana and their prices

Different types of cars and their prices in Ghana
YEN.com.gh
Mailfire view pixel